한국해양대학교

Detailed Information

Metadata Downloads

공기부양선의 추진 및 부양 축계 진동에 관한 연구

DC Field Value Language
dc.contributor.author 손선태 -
dc.date.accessioned 2017-02-22T05:50:04Z -
dc.date.available 2017-02-22T05:50:04Z -
dc.date.issued 2008 -
dc.date.submitted 56877-06-17 -
dc.identifier.uri http://kmou.dcollection.net/jsp/common/DcLoOrgPer.jsp?sItemId=000002174606 ko_KR
dc.identifier.uri http://repository.kmou.ac.kr/handle/2014.oak/8662 -
dc.description.abstract A propulsion and lift shafting system in the air cushion vehicle(ACV) is a flexible multi-elements system which consists of two aeroderivative gas turbines with own bevel gears, four stage lift fan reduction gear, two stage propulsion reduction gear, air propeller and lifting fans of large capacity. In addition, the system includes the multi-branched shafting with multi-gas turbine engines and thin walled shaft with flexible coupling. Such a branched shafting system has very intricate vibrating characteristics. Especially, the thin walled shaft with flexible couplings can lower the torsional natural frequencies of shafting system to the extent that causes resonances in the range of operating revolution. In the first part of this study, to evaluate vibrational characteristics some analytical methods for the propulsion and lift shafting system are studied and calculating equations are derived. Also torsional natural frequencies and mode shapes of the system are analyzed and the results are compared with potential sources of excitation. The analysis, including natural frequencies and mode shapes, for five operation cases of the system is conducted using ANSYS code with a equivalent mass-elastic model. The results of torsional vibration analysis are compared with the results of the vibration test conducted during Sea Trial. In the second part of this study, axial vibration analysis is conducted on a propulsion and lift shafting system for the air cushion vehicle using ANSYS code. The shafting system is totally flexible multi-elements system including wood composite material of air propeller, aluminum alloy of lift fan and thin walled shaft with flexible coupling. The results of analysis contains the axial natural frequencies and mode shapes of the shafting system taking into account an equivalent mass-elastic model for shafting system as well as the three-dimensional models for propeller blade and fan impeller. Such a flexible shafting system has very intricate vibrating characteristics. Especially, axial natural frequencies of flexible components such as propeller blade and impeller of lift fan can be lowered to the extent that causes a resonance in the range of operating revolution. The results for axial vibration analysis are presented and compared with the ones of axial vibration test for lift fan conducted during Sea Trial. In the third part of this study, for the study of lateral vibration on a propulsion and lift shafting system for an air cushion vehicle, lateral vibration analysis is conducted using ANSYS code. The analysis includes lateral natural frequencies, mode shapes and harmonic analysis of the shafting system taking into account a three-dimensional models for propulsion and lifting shaft system. In case of ACV the yawing and pitching rate of craft will be quite high. During yawing and pitching of craft, significant gyroscopic moment will be effected to the shafting and will generate high amplitude of lateral vibration. So, such a shafting system has very intricate lateral vibrating characteristics and natural frequencies of shafting must be avoided in the range of operating revolution. The control method of lateral vibration is also included in this study. This thesis includes evaluation of excitation frequency source and analysis, measurement and control of torsional, axial and lateral vibration on a propulsion and lift shafting system for an air cushion vehicle. It is considered that the performed study and the derived approach on the vibrational problems for ACV can be used for future development of ACV shafting system. -
dc.description.tableofcontents 제1장 서 론 1 1.1 논문의 배경 1 1.1.1 공기부양선의 개요 1 1.1.2 공기부양선의 진동 특성 3 1.2 연구 목적 4 1.3 연구 방법 및 내용 5 제2장 대상 축계 시스템 구성 및 기진원 분석 7 2.1 추진 및 부양 축계 시스템 구성 7 2.2 기진원 분석 8 2.2.1 서언 8 2.2.2 축계 구성 요소별 기진원 9 2.2.3 비틀림진동 기진원 12 2.2.4 종진동 기진원 12 2.2.5 횡진동 기진원 13 제3장 비틀림진동 14 3.1 분지계의 해석 14 3.1.1 감속기어 축계의 등가화 14 3.1.2 분지계의 고유진동수와 진동 모드 계산 17 3.2 운동방정식 17 3.3 모드 해석 20 3.4 비틀림진동 해석 결과 및 검토 24 3.4.1 해석모델 24 3.4.2 계통의 운전조건 및 해석범위 26 3.4.3 비틀림진동 기진주파수 28 3.4.4 해석 입력자료 29 3.4.5 해석 결과 및 검토 30 3.5 비틀림진동 계측 및 평가 45 3.5.1 서언 45 3.5.2 비틀림진동 계측 46 3.6 소결론 48 제4장 종진동 49 4.1 종진동 운동방정식 49 4.2 종진동 해석모델 51 4.2.1 해석모델 51 4.2.2 입력자료 55 4.3 해석 결과 및 검토 58 4.3.1 종진동 기진주파수 58 4.3.2 추진축계 58 4.3.3 구동축계 65 4.3.4 부양축계 68 4.4 종진동 계측 및 평가 73 4.4.1 서언 73 4.4.2 계측 및 평가 73 4.5 소결론 76 제5장 횡진동 77 5.1 횡진동 운동방정식 77 5.1.1 횡진동 운동방정식 77 5.1.2 선체운동에 의한 자이로스코픽 모멘트 82 5.1.3 불평형력 요소 83 5.2 횡진동 해석모델 84 5.2.1 해석모델 84 5.2.2 입력자료 87 5.3 해석 결과 및 검토 90 5.3.1 서언 90 5.3.2 추진축계 91 5.3.3 구동축계 103 5.3.4 부양축계 105 5.4 횡진동 계측 및 평가 107 5.4.1 서언 107 5.4.2 계측 및 평가 107 5.5 소결론 109 제6장 결 론 110 참고문헌 112 -
dc.language kor -
dc.publisher 한국해양대학교 대학원 -
dc.title 공기부양선의 추진 및 부양 축계 진동에 관한 연구 -
dc.title.alternative A Study on the Vibration of Shafting System for Propulsion and Lift in Air Cushion Vehicle -
dc.type Thesis -
dc.date.awarded 2008-02 -
dc.contributor.alternativeName Son -
dc.contributor.alternativeName Seon Tae -
Appears in Collections:
기관시스템공학과 > Thesis
Files in This Item:
000002174606.pdf Download

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse