한국해양대학교

Detailed Information

Metadata Downloads

복합신소재에 의한 무결함 FRP 절연봉의 개발에 관한 연구

DC Field Value Language
dc.contributor.author 박병길 -
dc.date.accessioned 2017-02-22T06:07:28Z -
dc.date.available 2017-02-22T06:07:28Z -
dc.date.issued 2004 -
dc.date.submitted 56877-06-13 -
dc.identifier.uri http://kmou.dcollection.net/jsp/common/DcLoOrgPer.jsp?sItemId=000002174979 ko_KR
dc.identifier.uri http://repository.kmou.ac.kr/handle/2014.oak/9124 -
dc.description.abstract An insulator is installed to support and insulate between an electrical pole and wire. Outmoded insulator of porcelain type has some defects. It has high-weight and flash & destruction often happen because of increasing of leak-current by high surface-energy of it. So now polymer insulator is developed to solve these demerits. In Korea, polymer insulator is manufactured, but the core of polymer insulator , FRP rod is not manufactured because of problem of manufacturing technology (eg. low speed of manufacturing and bubble, etc.) Now the whole quantity of FRP rod is imported in Korea. The localization of rod is studied in this paper. This FRP rod has the length 370mm, diameter 17.2mm, and is manufactured by pultrusion with glass & epoxy resin on this paper. Five different kinds of pultrusion speed (100, 200, 300, 400, 500 mm/min) is applied to this development rod. This purpose is to study the characteristic of rod according to different speed and the best condition of mass-production. And this development rod is tested on the specification "Standard Technical Specification of Korea Electric Power Corporation (ES) and Canadian Electrical Association (CEA), American National Standard for Insulator (ANSI), International Electrotechnical Commission (IEC)" From this study, we can know the maximum speed is 500mm/min. Forwards, I will study about Ø22mm insulator for power transmission, Ø40mm insulator for railroad besides this development rod 'Ø17.2mm'. -
dc.description.tableofcontents Abstract ⅲ 제1장 서론 1 1.1 연구배경 1 제2장 복합재료의 개요 5 2.1 강화섬유 5 2.2 수지 13 2.3 복합재료 성형공법 22 제3장 실험 방법 29 3.1 공법선정 29 3.2 원자재 선정 30 3.3 구조해석 33 3.4 실험 시료 제작 공정 49 제4장 실험 결과 및 고찰 57 4.1 실험 규격 57 4.2 기계적 특성 실험 59 4.3 전기적 특성 실험 75 제5장 결 론 103 참고문헌 105 -
dc.language kor -
dc.publisher 한국해양대학교 해사산업대학원 -
dc.title 복합신소재에 의한 무결함 FRP 절연봉의 개발에 관한 연구 -
dc.title.alternative A Study on the Development of Zero-defect FRP Insulating Rod by Composite Materials -
dc.type Thesis -
dc.date.awarded 2004-02 -
Appears in Collections:
기계시스템공학과 > Thesis
Files in This Item:
000002174979.pdf Download

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse