한국해양대학교

Detailed Information

Metadata Downloads

부분방전검출에 의한 절연진단 시스템의 설계 및 제작

DC Field Value Language
dc.contributor.author 차현규 -
dc.date.accessioned 2017-02-22T06:08:17Z -
dc.date.available 2017-02-22T06:08:17Z -
dc.date.issued 2012 -
dc.date.submitted 56987-11-06 -
dc.identifier.uri http://kmou.dcollection.net/jsp/common/DcLoOrgPer.jsp?sItemId=000002174998 ko_KR
dc.identifier.uri http://repository.kmou.ac.kr/handle/2014.oak/9147 -
dc.description.abstract This thesis dealt with a study on the algorithm design capable of detecting and analyzing the partial discharge pulses for insulation diagnosis of power facilities. Also, the proposed a TF map(Time frequency map) algorithm which can easily detect noises and discriminate the partial discharge pulse by analyzing the alteration of amplitude by time and frequency of signal. The measurement system consists of a coupling capacitor of coupling network, and a low noise amplifier. In order to simulate a inner discharge, a point-plane and a plane-plane electrode system were fabricated. The data acquisition module consists of a differential mode of a 2-channel analog input with the horizontal resolution of 100MS/s, vertical resolution of 8bit, and measurement range of ±20V. The measured partial discharge pulses are input to a data acquisition device and performed through an fabricated TF map, filter application and phase resolved partial discharge analysis(PRPDA) algorithm. The analysis graph is shown on a display unit. The experiment for evaluating the fabricated algorithm was conducted in accordance with IEC 60270 and the characteristics of discharges such as partial discharge magnitude(q), phase distribution(φ), and the repetition rate(n) were also analyzed. According to the experiment results, the noise and partial discharge pulse signal were discriminated, and φ-q and φ-q-n were also analyzed. The phase distribution of partial discharge pulse at each electrode system was 12°~132°, 191°~308° in plane-plane electrode and 7°~90°, 195°~282° in point-plane electrode. Therefore, it was confirmed that the proposed algorithm was efficient enough in analyzing and detecting the partial discharge pulse. -
dc.description.tableofcontents 목차 ⅰ 그림 및 표 목차 ⅲ Abstract ⅴ 제 1 장 서론 1 제 2 장 이론 3 2.1 절연열화 3 2.2 부분방전 7 2.3 TF map 10 2.4 검출기술 13 제 3 장 설계 및 제작 16 3.1 가상계측 시스템 16 3.2 저잡음 증폭기 23 3.3 결함전극계 25 제 4 장 실험 및 분석 28 4.1 실험 장치 28 4.2 결과 분석 29 제 5 장 결론 42 참 고 문 헌 44 -
dc.language kor -
dc.publisher 한국해양대학교 대학원 -
dc.title 부분방전검출에 의한 절연진단 시스템의 설계 및 제작 -
dc.title.alternative Design and Fabrication of an Insulation Diagnosis System by Detection of Partial Discharges -
dc.type Thesis -
dc.date.awarded 2012-02 -
dc.contributor.alternativeName HYEONKYU CHA -
Appears in Collections:
전기전자공학과 > Thesis
Files in This Item:
000002174998.pdf Download

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse