한국해양대학교

Detailed Information

Metadata Downloads

이동통신 시스템용 MIMO 안테나의 상호결합 억제와 광대역화 방법에 관한 연구

DC Field Value Language
dc.contributor.author 박철근 -
dc.date.accessioned 2017-02-22T06:51:58Z -
dc.date.available 2017-02-22T06:51:58Z -
dc.date.issued 2016 -
dc.date.submitted 57098-06-03 -
dc.identifier.uri http://kmou.dcollection.net/jsp/common/DcLoOrgPer.jsp?sItemId=000002300019 ko_KR
dc.identifier.uri http://repository.kmou.ac.kr/handle/2014.oak/9933 -
dc.description.abstract This dissertation describes a method of mutual coupling suppression and broadband method of MIMO antenna for mobile communication systems. Chapter 2 describes a method of mutual coupling suppression of planar array antenna and meander line MIMO antenna and/or PCS antenna for mobile terminal. The antenna with -27 dB mutual coupling suppression for IEEE 802.11a band designed and fabricated. Proposed antenna has an inverted U structure with via hole between array antennas. From application of inverted U structure, mutual coupling problem of microstrip patch antenna is solved and gain also increased about 2 dB over. The MIMO antenna for IEEE 802.11b and PCS antenna also are proposed. PCS antenna designed at limited area between meander line antennas for IEEE 802.11b. Mutual coupling between reference antenna and PCS antenna is suppressed under -18 dB by using shorting stub on PCS antenna. Gain of reference antenna and PCS antenna are 3.61 dBi and 0.05 dBi, respectively. Chapter 3 describes a mutual coupling suppression by design of low profile MIMO antenna for small base station. Two type antenna designed for 698~787 MHz and 1.71~2.17 GHz band. Low band antenna with impedance matching cylinder is a metal component that distance between ports is λ/8 to obtain high isolation. As a results, the mutual coupling between ports is suppressed as -19 dB. Measured gain is 6.07 dBi which is good performance. Low band MIMO antenna with 30 mm height has a low profile structure for small base station. The patch antenna for high band proposed as a type of PCB circular patch. The mutual coupling between ports is suppressed -18 dB by application ofλ/2 feeding line and perpendicular structure. Proposed antenna has high gain of 5.98 dBi and low profile structure with 24.565 mm. Chapter 4 describes a phase adjustable MIMO array antenna for 700 MHz band base station. Broadband single dipole antenna with dual polarization for array antenna proposed for 698~960 MHz band. It has 31.6 % bandwidth which is 12.2 % broader than bandwidth 19.4 % of reference antenna. Isolation between ports is under -26 dB. Because of the radiators is located at λ/4 wavelength distance from reflector plane and center of balun. Measured gain is 10.2 dBi at 960 MHz. Broadband 5-port phase shifter with electrical down tilting is designed. Measurement results of amplitude and phase has a good agreement compare with simulation's one. Array antenna is fabricated and measured. Total electrical down tilting range is from -14∘ to 0∘. The array antenna has a good S-parameters performance over all frequency band and tilting range. Measured gain and horizontal HPBW are 14.5~15.5 dBi and 65∘±5∘, respectively. Upper SLL of proposed MIMO array antenna is -15.5 dB which level is not affected to neighbor base station antenna systems. Chapter 5 describes the conclusion of this dissertation. The method of mutual coupling suppression between MIMO antennas was proposed for mobile terminal and small base station. Broadening method of the bandwidth dual polarization dipole antenna for base station is also proposed and evaluated. -
dc.description.tableofcontents 제 1 장 서 론 1.1 연구배경 및 목적 1.2 연구방법 및 내용 1.3 연구성과 제 2 장 단말기기용 MIMO 안테나의 상호결합 억제방법 연구 2.1 IEEE 802.11a용 안테나의 상호결합 억제방법 제안 2.1.1 역 U형 기생소자 설계에 의한 억제방법 2.1.2 제작 및 측정 2.2 IEEE 802.11b용 안테나와 PCS 안테나 간의 상호결합 억제방법 제안 2.2.1 미앤더 라인을 가지는 IFA 안테나에 의한 방법 2.2.2 스파이럴 구조의 PIFA형 PCS 안테나에 의한 방법 2.2.3 제작 및 측정 2.3 요약 제 3 장 소형 기지국용 MIMO 안테나의 상호결합 억제방법 연구 3.1 임피던스 정합 실린더를 가지는 2-포트 안테나의 제안 3.1.1 안테나 설계 3.1.2 제작 및 측정 3.2 반파장 급전 선로를 가지는 2-포트 안테나의 제안 3.2.1 안테나 설계 3.2.2 제작 및 측정 3.3 요약 제 4 장 기지국용 MIMO 배열 안테나의 광대역화 연구 4.1 위상가변 배열 안테나의 설계 4.1.1 PCB 결합 급전부를 가지는 안테나의 광대역화 방법 제안 4.1.1.1 안테나 설계 4.1.1.2 제작 및 측정 4.1.2 광대역 5-포트 위상가변기의 제안 4.1.2.1 위상가변기 설계 4.1.2.2 제작 및 측정 4.2 배열 안테나의 구성 및 특성 측정 4.2.1 배열 안테나의 구성 4.2.2 배열 안테나의 특성 측정 4.3 요약 제 5 장 결론 참고문헌 본 연구와 연관된 발표 논문 감사의 글 -
dc.language kor -
dc.publisher 한국해양대학교 대학원 -
dc.title 이동통신 시스템용 MIMO 안테나의 상호결합 억제와 광대역화 방법에 관한 연구 -
dc.type Thesis -
dc.date.awarded 2016-08 -
Appears in Collections:
전파공학과 > Thesis
Files in This Item:
000002300019.pdf Download

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse